Page 11
17.
Install a corner sleeve onto each end of
a side tube weldment then use an 8mm
allen key to tighten the hardware from
Steps 15+16.
18.
Repeat Step 17 to build a total of two side
tube with corner sleeves assemblies.
x2
8mm
Fig. 20
19.
Use an 8mm allen key to secure a nut
plate to the inside of the corner sleeves
located on the ends of the side tube
assemblies built in Step 17+18 using two
(2) pieces each of the M12 flat washer
and M12 x 30mm button head cap screw
-
DO NOT FULLY TIGHTEN.
20.
Repeat Step 19 for the other side tube
assembly built during Step 18.
x2
8mm
Fig. 21
21.
Install the side tube assemblies onto the
front and back tube weldments.
Fig. 22
