Nautilus Commercial Series TreadClimber TC916, Service Manual

Page: 5 / 60

Nautilus® TreadClimber®, Model TC916 Service Manual
iMPoRtaNt Safety PRecautioNS
7. To avoid potential safety and electrical problems, replace with manufacturer’s specified parts only.
8. This equipment is classified Class I, Type B, ordinary equipment. Not protected against fluid ingress. Rated for
continuous operation. Do not operate this equipment in the presence of flammable anesthetic mixtures.
9. Do not let liquid enter the controller. If it does, the controller must be inspected and tested for safety by an approved
technician before it can be used again.
10. Increased risk due to leakage current can result if this equipment is not grounded properly.
11. The TreadClimber
®
machine must be on an appropriate, dedicated electrical circuit. Nothing else should be
connected to the circuit.
12. Do not stand on the TreadClimber
®
TC916’s hood or front trim cover.
13. Close supervision is necessary whenever the machine is used by or near children, invalids, or disabled persons.
Failure to follow the conditions set forth below shall limit, to the extent allowed by law, Nautilus Inc. responsibility for
the safety, reliability, and performance of this equipment.
• The Owner’s Manual must be read in full by each owner and trainer before the product is first used. Each user
must be instructed in the proper use of the TreadClimber
®
machine and its accessories.
• Do not remove the TreadClimber
®
hood: dangerous voltages are present. Components are serviceable only by
qualified service personnel.
• The electrical wiring within the TreadClimber
®
equipment setting and the electrical installation of the
TreadClimber
®
machine must comply with the applicable local or provincial requirements.
• The equipment must be used in accordance with the instructions for use.
• For further information or instruction on use, maintenance or specifications, please contact your Authorized
Nautilus Fitness Dealer or Service Technician.