background image

C H A N G I N G  T H E   G A M E   I N   H E A LT H  A N D   F I T N E S S  

36

MAINTENANCE INSTRUCTIONS

Recharging the Battery Back-Up 

The Commercial Series EV916 and E916 elliptical are both self-powered 

(cordless) with a rechargeable battery back-up. Typically, the elliptical can 

be operated without plugging in the battery charger. If, however, the console 

fl ickers during operation or the console display does not light up while using the 

machine, then use the battery charger to recharge the battery back-up.

The battery charger is supplied with the unit and plugs into a standard 115 volt, 

15 amp outlet. (all major voltage plugs are available) The plug-in for the battery 

charger is located in the rear of the machine at the base.

Plug the wall pack battery charger into the connector and charge the battery for 

approximately 24 hours and then recheck it. It is okay to use the machine while 

the battery charger is connected.

The console will power on as user starts to pedal machine, and will stay lit for 

up to 60 seconds in pause mode. The console will power off after 60 seconds of 

stopping exercise.

Battery Disposal

When ordering new batteries, you will need to properly dispose of (recycle) 

your old lead-acid batteries. Most federal and state regulations require lead-

acid batteries to be recycled. Do not throw away old batteries. Lead is a toxic 

heavy metal, hazardous to living organisms. Disposal instructions and a list of 

recycling centers are tabulated in the Appendix. If you have questions, contact 

the Customer Service Department at (800) 331-3578.

EV9.16 / E9.16 battery charger plug

CommElliptical_OM_0305.indd   36

6/6/2005   2:23:00 PM

Summary of Contents for BE STRONG E916


























































Reviews: