13
1
4
2
3
unscrew the M25 plug from the
accessory port with a coin and
remove the caps of M16 SDI
Bulkhead and SDI surface cable
tighten the M16 SDI Bulkhead
into the pre-installed M25-M16
step down adapter
plug the cable into the SDI bulkhead
connect the 25060 SDI cable
from SDI bulkhead
tighten the cable by turning the
screw clockwise
rotate the cable towards the
housing before placing the
monitor
* drawings as illustrations only
SDI Surface Cable to Monitor Housing
CABLE CONNECTION - SDI OUT
*Please note that M16 SDI Bulkhead, 25060 SDI cable and SDI surface cable is not included in the package
M25 Plug
M16 SDI Bulkhead
SDI Surface
Cable Cap
