11
1.
After verifying that the main O-ring is in good condition, lightly coat it with the
lubricant provided.
2.
Make sure the O-ring groove located in the front part of the housing is free
from any foreign material; the groove can be cleaned with the aid of a
microfiber cloth.
3.
Place the main O-ring into the groove by gently pushing it, first at the corners,
then the whole perimeter.
4.
(Optional) If necessary, spacers (25011) can be used to increase space between
the grip handles and the housing; A pair of small handles (28123) is also
available to decrease space between the grip handles and the housing.
5.
(Optional) To install the electrical bulkhead:
ii.
Install the M16 to M14 step down
adaptor (25019) with a spanner.
(When installing from M16 accessory
hole)
i.
Remove the M14/M16 plug from the
threaded hole with a coin.
