19
1.
Remove the retainer O-ring of the
viewfinder inside the rear half of
the housing by making use of the
recess on the viewfinder.
In order that users can change to a preferred viewfinder easily, the 0.66X
viewfinder which comes with this housing is designed so that it can be removed and
re-installed by following the simple steps described below.
To remove the viewfinder:
To re-install the viewfinder:
3.
Push the viewfinder from the
outside of the housing until it
cannot go in any further.
4.
Place the retainer O-ring of the
viewfinder back from inside the
housing.
2.
Gently push the viewfinder from
the inside of the housing.
1.
Lightly coat the O-rings on the
outer periphery of the
viewfinder body with lubricant.
2.
Align the viewfinder with the
sleeve in the display window.
