9
1.
After verifying that the main O-ring is in good condition, lightly coat it with the
lubricant provided.
2.
Make sure the O-ring groove located in the front part of the housing is free
from any foreign material; the groove can be cleaned with the aid of a
microfiber cloth.
3.
Place the main O-ring into the groove, first at the corners, then the whole
perimeter.
4.
Setting up the cooling fans:
Insert a Sony NP-F570 battery or Atomos 7.4V 2600mah battery to the fan battery
holder as shown. Only use the battery models stated above.
