Fig.6
Rotate 180
o
and remove to open
Fig.5
MARINE 200, MARINE 250 &
MARINE 300
MARINE 280
Using the SEASCOOTER
™
for diving -
adjusting the buoyancy.
Your SEASCOOTER
™
MARINE 200 can be used for diving up to
20m/65ft but will need to be adjusted for neutral buoyancy.
Your SEASCOOTER
™
MARINE 250 / MARINE 280 / MARINE 300
can be used for diving up to 30 m / 100 ft but will need to be
adjusted for neutral buoyancy.
The SEASCOOTER
™
must never be adjusted for negative
buoyancy to avoid it sinking if accidentally released.
To adjust for neutral buoyancy follow these instructions
1. Make sure the SEASCOOTER
™
is in the Off position.
2. Remove the SEASCOOTER
™
from the water, give a half
turn to the Latches, remove them (see figure 5) and
remove the Buoyancy Control Chamber.
3. Open the Buoyancy Chamber and add a small amount of
rocks or a lead weight (see figure 6).
4. Cover the Buoyancy Chamber with the Nose Cone then
secure the latches and place the SEASCOOTER
™
in the
water. If the SEASCOOTER
™
is neutrally buoyant it will
neither float nor sink.
5. If the SEASCOOTER™ sinks, remove the weight until it is
neutrally buoyant.
If the SEASCOOTER™ is still positively buoyant repeat
step 3, until it is neutrally buoyant.
11
10
If the SEASCOOTER™ is later used for swimming
or snorkeling be sure to remove the weight from
the Buoyancy Chamber so the SEASCOOTER™
has positive buoyancy.
CAUTION
