Nautel XR12, Operation And Maintenance Manual

Page: 33 / 81

XR12 Operations and Maintenance Manual Operating the transmitter
Page 2-8 Issue 3.1 2013-03-14
Controlling power modules
Figure 2.3: Power Modules page
On this page the user can perform a power module reset by pressing the
PM Reset
button.
The user can set the
Transfer Mode
to Auto or Manual . In Auto mode, if one of the enabled power
modules fails, the transmitter will perform a power module changeover to replace the failed power
module with the designated standby power module.
The user can select which two power modules are active and which is the standby by editing the
Desired Config option. The possible combinations are:
• Modules A and B enabled, with module C on standby.
• Modules A and C enabled, with module B on standby.
• Modules B and C enabled, with module A on standby.
The Current Status line displays the currently-enabled module(s). If no power module is currently
enabled, an unusual situation, then the message None enabled will be displayed.
Press the
Back
button to return to the
Main Menu
page.
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Transfer Mode: Manual
Desired Config: A,B enabled, C standby
Current Status: A enabled
Use Arrow Keys to Select a value.
Press EDIT to modify the value.
PM Reset Edit Back
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Transfer Mode: Manual
Desired Config: A,B enabled, C standby
Current Status: A enabled
Use Arrow Keys to Select a value.
Press EDIT to modify the value.
PM Reset Edit Back