natus XLTEK Protektor32 Instructions For Use Manual Download

Page: 3 / 81

XLTEK Protektor32

Instructions for Use

Publisher’s Notice

009090, REV I
Xltek Protektor32 Instructions for Use

Natus Medical Incorporated
DBA Excel-Tech Ltd. (XLTEK)
2568 Bristol Circle
Oakville, Ontario, L6H 5S1 Canada
Tel: 905-829-5300 or Fax: 905-829-5304
Toll Free (US & Canada): 800-303-0306
Technical Support Email:

[email protected]

Website:

natus.com

EUROPEAN AUTHORIZED REPRESENTATIVE:
Natus Manufacturing Limited
IDA Business Park, Gort
Co. Galway, Ireland

may not be copied in whole or in part except with the prior written permission of Natus Medical

Incorporated. The copyright and the foregoing restrictions on the copyright use extend to all media in

which this information is preserved.
This copy of the User Manual shall be used only in accordance with the conditions of sale of Natus

Medical Incorporated or its distributors. Natus Medical Incorporated makes no representations or

warranties of any kind whatsoever with respect to this document. Natus Medical Incorporated disclaims

all liabilities for loss or damage arising out of the possession, sale, or use of this document.

Summary of Contents for XLTEK Protektor32


















































































Search results

Summary of Contents for XLTEK Protektor32

Reviews:

Related manuals for XLTEK Protektor32

Brands by name

Popular brands

natus XLTEK Protektor32, Instructions For Use Manual

Search results

Summary of Contents for XLTEK Protektor32

Reviews:

Related manuals for XLTEK Protektor32

Brands by name

Popular brands