OLYMPIC CFM 6000
Operator’s Manual
36
Specifications
Intended Use
The Olympic CFM 6000 is intended to monitor
the state of the brain by acquisition of EEG
signals in the intensive care unit, operating
room, and for clinical research.
Dimensions
CFM 6000 Size
13.70-in. wide × 12.25-in. high × 11.25-in. deep
34.8-cm wide × 31.1-cm high × 28.6-cm deep
CFM 6000 Weight
17.5 lb
7.9 kg
CFM cart Size
38.75–49.75-in. high* × 25-in. diameter footprint
98.42–126.36-cm. high* × 63.5-cm. diameter footprint
*Adjustable, measurement to top of drawer.
CFM cart Weight
40 lb
18.1 kg
Computer and Connections
Display
SVGA video
Liquid-crystal display (LCD) touch screen
800 × 600 pixel resolution; 32-bit colors
Minimum viewing angle of 120 degrees
Processor
P5-266–MHz processor or equivalent
256-MB RAM
Internal Components
CD-RW drive; internal thermal printer
80-GB hard drive capacity (minimum)
External Connections
RS-232 I/O port
RJ-45 (10/100) Ethernet port
USB port for 60601-1–approved devices (see the USB
port precautions on page 3)
PS2 standard keyboard serial port
PS2 standard mouse serial port
Hospital-grade power cord
Connecting Cables
Cables that connect to the I/O ports must be of
the following types and no greater than the following
lengths:
USB: two meters, shielded
Serial: four meters, shielded
Ethernet: five meters, Category 5
Note:
Mouse and keyboard ports are for service use only.
Printer Paper
Thermal paper roll, 50-mm wide
Five-year shelf life if stored at less than 77ºF (25ºC),
65% relative humidity
Image life approximately five years if stored at less
than 77ºF (25ºC), 45–65% relative humidity
CFM cart Features
Drawer tilts 15° forward and 15° backward
Five-legged base with swivel casters; two locking
casters
Convenient handle for pushing, pulling, and swivelling
Easy height adjustment with foot-actuated pedal
Storage drawer for keeping brain monitoring supplies
nearby and ready for use
Power Requirements
Voltage: 100–240 V~, universal input, single phase
Consumption: 1.0A
Frequency (current): 47–63 Hz
Ground
Does not exceed 0.2
Ω
(CFM 6000 and cord)
Fuses
Two (2) internal 3AG, 2.5A, Slo-Blo, 250 V~ with
external access
Environment
Temperature
Operating:
65–85°F
18–29°C
Shipping:
-13–158°F
-25–70°C
Storage:
-13–113°F
-25–45°C
Relative Humidity (RH)
Operating: 0–95%, non-condensing
Non-operating: 0–100%, condensing
Operating Altitude
Up to 6,560 ft.
2,000 m
Operating and Non-Operating Pressure
500–1060 hPa
14.7–31.3 inHg
60601 Classification Notes
Type of protection against electrical shock: Class I
equipment
Type BF patient-applied parts
Ordinary equipment (IXP0)
Not suitable for use in the presence of flammable
anesthetics
Continuous operation
