natus Nicolet User Manual Download Page 29

Page: 29 / 82

Revised 11/21/18

2-7

Overview

Must be in the

Probe Biphasic

, which is when the Stimulator is being used without the Stimulus Switching

Unit (SSU).

Press button to view the present setting, rotate the

Selector Knob

until the desired setting/value is displayed

and then press the

Selector Knob

to select.

Future use.

Serial Interface

For Nicolet system interface.

Not used.

Future use.

Display

Displays parameter options you can choose after pressing one of the
parameter buttons.

Isolated Stimulation
Outputs, Probe

Allows use of approved Natus Neurology Incorporated Hand-held, Bipolar
Stimulating Probes without the Stimulus Switching Unit (SSU). This is
referred to as the Probe Biphasic mode.

Stimulus Switching
Unit (SSU) Cable
Connector

Allows cable to be connected to the Stimulus Control Unit (SCU).

LEGEND

Summary of Contents for Nicolet



















































































Search results

Summary of Contents for Nicolet

Reviews:

Related manuals for Nicolet

Brands by name

Popular brands

natus Nicolet, User Manual

Search results

Summary of Contents for Nicolet

Reviews:

Related manuals for Nicolet

Brands by name

Popular brands