natus 60/65, Instruction Manual

Page: 8 / 96

Section 1: Installation
OLYMPIC SMART SCALE
® Model 60/65
Page 1-2
Locking Units to Grams (Optional)
The standard configuration of the scale allows you to toggle the units of
measurement between metric and English (grams and pounds). You can
permanently lock the units to measure grams only.
1. Press
On/Off
on the front panel to turn on the scale.
2. Press gm/lb until grams are selected.
3. Press On/Off to turn off the scale.
4. Lift and turn over the scale to gain access to the gm/lb disabling switch.
With the scale oriented as shown below, the switch can be accessed through
a 3/8” hole on the right hand side of the bottom of the scale. ( Fig. 1B )
5. Flip the gm/lb disabling switch to the left.
6. Press On/Off to turn on scale. The units are now locked to grams.
7. Press gm/lb to verify the units are locked to grams. If locked, the display
should still read grams.
8. Place the locked to GRAMS label over the gm/lb switch.
Access to gm/lb
disabling switch
Fig. 1B