11
Visit NaturesGenerator.com for More Information
Step 7: Insert the 8mm hex key into the rotor sha�. Hold the blade assembly and �ghten the
M16 nut by turning the 8mm hex key counter clockwise. It is recommended to use a hex key
extender (not included) that provides more leverage to �ghten the lock nut. Finally, spin the
blades slowly to be sure they turn freely and the hub does not move in along the rotor sha�.
Step 8: Place the nose cone over the center of the blade assembly and snap the nose
cone into place.
Step 9: Carefully raise the tower and secure the base and/or cables.
Nose cone
The lock nut must be �ghten all
the way down!
