Visit NaturesGenerator.com for More Information
Step 5: Place one of the blades on one of the hub sockets. Place a lock washer and then
a flat washer on the bolt and then insert the bolt through the blade and the socket. Place a
nut on the other side of socket and �ghten the bolt with the 5mm hex key. Repeat this
process on all three blades. Make sure the lock washer and flat washer are placed in the
right order. The blades will become loose if they are not installed properly.
Step 6: Slide the blade assembly onto the rotor sha� and place the lock washer and lock
nut on the sha�. Make sure the lock washer is right next to the lock nut.
M8 nut
M8 lock washer
M8 bolt
10
6mm hex key
Locker washer and flat washer
must be placed in the right order
to secure the blades in place.
Lock washer must be right next
to the lock nut.
M20 lock nut
M20 lock washer
