8
How to choose the tower
Your Nature’s Generator Powerhouse Wind Turbine is designed to mount on nominal 1.5 inch
schedule 40 steel tubing or piping. The outside diameter of the tubing or piping shall be
around 1.875 inch to 1.900 inch. The steel tubing or piping should be available through your
local hardware store. Under no circumstances should plas�c pipe be used to construct a tower.
Towers must be capable of withstanding 270 pounds of load in the horizontal direc�on at the
wind turbine.
Visit NaturesGenerator.com for More Information
Cau�on: Choose a calm day and have someone available to help during the installa�on
process.
Cau�on: The blades' edges are sharp. Please handle carefully.
Cau�on: Do not assemble the blades before the body is mounted on the pipe or tower.
Cau�on: Do not connect your Nature’s Generator Powerhouse Wind Turbine with Nature's
Generator Powerhouse or Nature's Generator Powerhouse Power Pod. un�l all installa�on
has been completed.
How to Install your Nature’s Generator Powerhouse Wind Turbine
Step 1: Run the wind turbine cable through the pipe and drag the connector close to the
Nature's Generator Powerhouse or Nature's Generator Powerhouse Power Pod. The female
connector should be close to your Nature's Generator Powerhouse Wind Turbine and the male
connector should be close to your Nature's Generator Powerhouse or Nature’s Generator
Powerhouse Power Pod.
Step 2: Connect the wind turbine cable and your Nature's Generator Powerhouse Wind
Turbine by pushing and twis�ng the connectors.
Female
Connector
Male
Connector
DC
USB
AC
kw
kw
BATTERY
V
LOAD
BAT
LOAD
OUTPUT
INPUT GRID
WIND
SOLAR
INPUT
SOLAR INPUT
WIND INPUT
DC
OUTPUT
MAIN
POWER
AC CHARGE
QC3.0
TYPE-C
AC OUTPUT
LINE 1 and 2
MAX 7200 WATTS TOTAL
240V
LINE 1
LINE 2
MAX 3600 WATTS TOTAL
120V
MAX 3600 WATTS TOTAL
120V
ON
OFF
ON
OFF
12V
48V
