NRC-6-SV
Room Thermostat and Remote Control Module
•
Chimney fan
- Current speed of the chimney fan
•
Boiler Timers
- the next action, controlled by the timers for inclusion/exclusion of the
burner
•
Power
– calculated current power of the burner, from consumption of pellets
•
Temp DHW
– temperature of the hot water in the heater
•
Exhaust temp
– temperature of the exhaust gases
•
Set temperature
– Current set temperatures
•
Timers for heating
– next action that is going to be performed by the timers.
Screen –
The field
Brightness
changes the illumination of the display.
NRC-6 is not
equipped with automatic brightness adjustment of the screen
Additional information about controller's operation
After the power supply of the controller has been turned on for two seconds, a yellow text
with the Control module's type will appear on the screen. The text will differ based on its
software. NRC-6 MV’s software controls the pellet burner and the software of the NRC-6 SV,
provides the additional option to work as a room thermostat. Next, a screen will come up,
showing the version of the controller and the software version of the
Control and Executive
modules:
User Manual Ver 3.3
p.20 /21
