NRC-6-SV
Room Thermostat and Remote Control Module
Language
Press the up or down navigation buttons (▲ ▼) to select the language for the controller's
menu and confirm your choice by pressing the right navigation button (►) or
Menu (
)
.
After that, you will be redirected back to the
Main Menu
, but with the language selected. An
arrow pointing down at the bottom of the screen or up on the top of the screen indicates that
there are more options in the corresponding direction outside of the visible area of the screen.
Timers
– In this menu you can adjust and activate the timer intervals for when the
burner's operation is allowed. If at least one of the three timers is activated, the burner
will work only during the interval of the activated timer/s. The burner will be on
Standby mode
when the time is outside of the intervals. In addition the rest of the
required conditions must also be presented, such as: the work mode must be anything
but “
Standby
”, the temperature of the water in the boiler must be below the set
temperature, OD and RT inputs must not be active, and others.
User Manual Ver 3.3
p.17 /21
This option is available only if
the controller is equipped with
WiFi modem and has
an access to the Internet
