8
5. Maintenance
The mirror is basically maintenance-free. Outer side of the mirror requires washing by classic detergents for washing windows. Do not use any
aggressive detergent (especially those containing chlorine and its derivatives) which can cause oxidation of the mirror. Inner side of the mirror does
not require any specific maintenance. In case of damaging the protective cover, it is necessary to have it replaced in producer’s service centre.
Warning! Turn the mirror off and turn off the electricity supply mains before operating the mirror. Electric equipment of the mirror is maintenan-
ce-free, only in case of light source failure it is necessary to replace it. Contact the producer or seller for any repairs. Installation of electrical device
requires qualified electrician and it should be done in accordance with regulations. If the supply cable is damaged, it must be replaced by the new
cable provided by the producer or their service technician.
1. General Information, Purpose of Use
Before the first use, the consumer is obliged to read the instructions to ensure secure and problem-free use of the product. It is a stationary LED
light determined to illuminate inner spaces like for example bathrooms, hallways, etc. The light is constructed as a mirror with a light source located
behind the mirror. The mirror can be used as a decorative lighting. Some models with larger amount of individual LED diodes provide sufficient
lighting and they can be used for illuminating the room. LED mirrors are illuminated by high-performance LED strips characterized by low energy
consumption and clear luminosity. Lifespan of LED diodes is up to 50.000 hours.
2. Safety instructions
For any kind of handling, maintenance or assembly it is necessary to follow basic safety requirements resulting from the specific activity.
Please follow the next safety instructions in this manual.
Instructions marked by this sign are determined to prevent any risk or injury by general danger.
Instructions marked by this sign are determined to prevent any risk or injury by electric current.
Connecting to electricity network requires qualified electrician.
Requirements for connecting the bathroom mirror:
- The mirror shall be located according to valid security regulations.
- The mirror shall be connected to the mains in the network 1NPE 230V 50Hz TN-S.
- Front fuse max: 10A and residual-current device (RCD) 30mA
3. Handling
The light is packed in cardboard and covered by wrap and protected by polystyrene layer and MDF desk. Due to its weight and large sizes,
handling with the light should be done carefully. The light is equipped with mirror which is very fragile and easily breakable. In case of
handling with angular mirrors, let the protective plastic edges remain attached to the mirror and take them off after the installation is
done.
4. Installation
The light is determined to be attached to wall or another suitable inner surface.
The light can be installed in the area around the basin or around the shower or bath but it cannot be placed in zones 0+1+2 (see the pictures in
the paragraph Instructions for Assembly – installation on wall). Connecting to electricity network requires a qualified electrician and must be done
according to the regulation 50 Sb/78. Connect the supply cable (at the back side of the mirror) to the existing mains in the wiring box placed prefe-
rably behind the mirror. If there is already a supply cable in the wall, it is possible to connect it with the mirror cable on the back side of the mirror by
the terminal box (article number ZP 01 – not included in the package). It is highly recommended that the installation is accomplished by two persons.
6. Warranty period
There is a warranty period in accordance with the Civil Code. The producer provides the warranty period of 24 months beginning from the date of
purchase. Any other handling with the product than this recommended in the manual is forbidden.
1. general information, purpose of use
2. safety instructions
3. handling
4. installation
5. maintenance
6. warranty period
7. Instructions for assembly
8. EU certificate of conformity
EN Mounting Instruction
8
8
8
8
8
8
9 - 12
13
