Natural Power cardio strong CST-NAT, Assembly And Operating Instructions Manual

Page: 12 / 32

12
NATURAL ROWER
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1: Assembly of the tank module
1. Remove the accessories, seat,
tank module, rear distance piece
and rails from the packaging.
2. Attach the tank module to
the wooden rails by loosely
tightening the four screws with
the Allen key.
3. If necessary, loosen the four
front screws and the screws at
the bottom of the foot rest to
align the rails.
4. Retighten the screws.
Step 2: Assembly of the seat onto the rails
1. Place the seat on the rails so that the notch points towards the rear of the rowing machine.
2. Make sure that the guide wheels (the smaller wheels on the bottom of the seat) are located
under the lip seal on the rails.