NATIVE TCT User Manual Download Page 89 | Manualshive

Page: 89 / 162

NATIVE TCT User Manual Download Page 89

Native TCT User Guide-v1.0

Figure 3-113: Connection

4.2.1.37.

System Settings

To perform the test:

a.

In System Settings make changes in Display->Font->Size. This should be reflected in the
tbtcoreapp - System Settings.

b.

In System Settings make changes in Date and Time->24 clock. This should be reflected
in the tbtcoreapp - System Settings.

c.

When System Time changes System Time in tbtcoreapp changes status.

d.

If lock sound in system settings in sound menu is present, change its setting. This should
be reflected in the tbtcoreapp - System Settings.

e.

In System Settings make changes in Sound->Notification as Silent. This should be
reflected in the tbtcoreapp - System Settings as Silent Mode enabled.

f.

If screen touch sound in system settings is present, change its setting. This should be
reflected in the tbtcoreapp - System Settings.

g.

In System Settings make changes in Display->Auto Rotate Screen. This should be
reflected in the tbtcoreapp - System Settings as Rotation Control is enabled.

h.

If Motion is present in system settings menu, change its setting. This should be reflected
in the tbtcoreapp - System Settings.

i.

Enable/ Disable Flight Mode in System Settings. Same should be reflected in tbtcoreapp -
System Settings.

j.

Lock/Unlock the device. Same should be reflected in tbtcoreapp - System Settings as
Device is unlocked/locked. Locked status is for a fraction of second.

k.

If all the steps are performed correctly then Pass, otherwise Fail.

«
...
87
88
89
90
91
...
»

Summary of Contents for TCT



































































































































































Reviews:

No comments