Native TCT User Guide-v1.0
Figure 3-87: IME Alphabetic
IME Numeric
This module shows a custom Numeric keyboard layout and its actions.
To Test this Module –
a.
Set Default keyboard to TBT keyboard:
b.
Go to Settings>Language and input > keyboard and enable TBT keyboard, then Select
Default keyboard as TBT Keyboard.
c.
Open IME Numeric module from TBT module list
d.
An
Numeric
keyboard
will
be
shown
and
"ELM_INPUT_PANEL_LANG_AUTOMATIC" will be shown at the bottom key.
e.
Press Numeric keys then corresponding numerics will be written in entry field.
f.
Press BACK key to remove one character at a time from entry field.
g.
Press DS key to delete character under cursor from entry field.
h.
Press Spc key to make a space character in entry field.
i.
If everything works properly as steps mentioned above then Pass otherwise Fail.
Figure 3-88: IME Alphabetic
IME Events
This module Tests the effect of Language change Event to custom input method.
To Test this Module –
a.
Set Default keyboard to TBT keyboard:
b.
Go to Settings > Language and input > keyboard and enable TBT keyboard, then Select
Default keyboard as TBT Keyboard.