7
6
AERATION: IMPORTANT
The unit may heat when used. Do not
place the equipment in a completely
closed room or in a compartment
insufficiently ventilated. Make sure that no
small object can enter PR / 01. If this should
happen, immediately switch off the device,
disconnect it from the wall outlet and
contact your dealer for help and advice.
ATTENTION
The exclamation point within an
equilateral triangle is intended to alert
the user of the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the apparatus.
CAUTION
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE BACK PANEL.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
DANGEROUS VOLTAGE
The lightning flash with arrowhead, within
an equilateral triangle, is intended to alert
the user of the presence of non-insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to person.
WARNING: To reduce the risk of fire
or electric shock, do not expose this
apparatus to rain or moisture. The
apparatus shall not be exposed to dripping
or splashing and that objects filled with
liquids, such as vases, shall not be placed
on apparatus.
LOCATION
Wisely select a spot for installing your
equipment. Avoid placing it directly in
sunlight or nearby a heat source. No fire
source such as lit candles should be placed
on the device. Also, avoid any locations
that could cause vibrations, dust, coolness
or moisture. The device can be used at
average room temperatures.
Do not install the equipment in a completely
closed room or in a set of compartments.
Do not place the unit on an unstable
surface. Due to the distributed magnetic
fields, no record player or CRT television
set must be placed nearby the device to
avoid possible interference.
POWER SOURCE
The unit should only be used with the type
of electric power source compatible. If
you are not sure about the power source
rating in your place, please contact your
dealer or the company responsible for the
electric power in your region. The unit was
designed to be left in standby mode when
not in use; this will increase the amplifier’s
service life.
To switch off the unit, turn the On/Off
switch to Off position. If you do not
intend to use the unit for a long time,
simply unplug it from the power socket.
OVERLOAD
Avoid overloading the wall-mounted
electrical installations or the extension
cords because this could cause a fire or
an electrical discharge. Overloaded DC
installations, extension cords, damaged
power cables, a damaged or cracked
insulation and broken plugs are dangerous.
They could cause an electrical discharge
or a fire.
Make sure that each cable is correctly
inserted. To avoid humming or background
noise, do not tangle or cross the power
cord with the audio cables.
CLEANING
To clean the unit, wipe with a dry, lint free
cloth. Do not use liquid cleaning products
containing alcohol, ammonia or abrasives.
Do not use a spray on or nearby the unit.
REPAIRS
This unit cannot be repaired by the user. Do
not try to repair, dismount or disassemble
the unit if a problem occurs. A strong
electrical discharge could take place if this
precautionary measure is not respected. In
case of a problem or failure, please contact
your dealer.
S A F E T Y I N F O R M A T I O N
