NATIVE UNION MM03, Instruction Manual

Page: 6 / 103

ATTENTION : The
Bluetooth ®
Wireless technology signal reception works up to a 10m range
(open area).
If your mobile phone moves out of range, the MM03 will be automatically disconnected.
The white LED on the handset will turn off to indicate disconnection.
USE YOUR MM03 WITH YOUR iPHONE ® (OR ANY OTHER
BLUETOOTH
®
WIRELESS TECHNOLOGY MOBILE PHONE)
MAKING A CALL
To make a call with your MM03, simply dial the number on your mobile phone keypad as you
normally would. When the call connects, you will now speak and listen through the last active call
device, whether it is the MM03 or your mobile phone.
If you wish to swap the call between MM03 and your mobile phone, press and hold the volume
control ‘+’ button for 2 seconds, or alternatively, select
from your mobile phone interface setting.
ANSWERING AN INCOMING CALL
To answer a call on your MM03, simply pick up the
handset from the base and the call will be connected
on the MM03 automatically. If the handset is not on
the base at the time of the call, press the MFB button
once to answer the call. To answer the call directly on
your mobile phone, simply answer by using your mobile
phone interface.
If you wish to swap the call between MM03 and your
mobile phone, press and hold the volume control ‘+’
button for 2 seconds, or alternatively, select from your
mobile phone interface setting.
DISCONNECTING A CALL
To hang up a call on your MM03, simply place the
handset back on the base or press the MFB
button once.
9 8
or
or
Note :
Some phones will connect to the MM03 automatically.
If your phone prompts you to confirm whether you want to connect to the MM03, accept the
connection request. If your phone does not connect to the MM03 then use your mobile phone’s
Bluetooth menu to initiate a connection manually.
If you have connected the MM03 with an iPhone ® , a MM03 battery icon will appear on your phone’s
taskbar indicating the current battery level of the MM03 handset.
You can use now your MM03 !