background image

Correcting Beatgrids of Tracks

:If the SYNC function is enabled but the tracks playing are not

synced, it is likely that the Beatgrids of the tracks are not calculated correctly. The S2 allows
you correct Beatgrids manually. For more information, refer to 

Correcting Beatgrids of Tracks

.

Mixing Tracks using the Jog Wheels

: This tutorial introduces you to the workflow of mixing

two tracks manually, using the Jog wheels and the Headphone CUE channel. For more infor-
mation, refer to 

Mixing Tracks Using Jog Wheels

.

7.1. Browsing and Loading Tracks

The S2 lets you conveniently browse for your music in TRAKTOR. Using the 

BROWSE

 controls

on the Decks, you can quickly open the Browser view, navigate in the Track List, and select Favor-
ite folders and Playlists for loading the track you are looking for.

Opening the Browser View

You can maximize the Browser by opening the Browser view in TRAKTOR:

1.

Press the 

Browser View

 button.

The TRAKTOR Layout switches to Browser view.

2.

Press the 

Browser View

 button again to close the Browser view in TRAKTOR.

Finding a Track

On the Deck you want load a track:

1.

Turn the 

BROWSE

 encoder to scroll through the Track List for selecting a track.

2.

Press and hold 

SHIFT

 + turn the 

BROWSE

 encoder to select another favorite folder.

The Track List content changes accordingly.

Loading the Track into the Deck

To load the selected track into the Deck:

Push the 

BROWSE

 encoder.

The track is loaded into the Deck. Depending on the loaded track, the Deck Type switches
accordingly.

If the track is loaded into the Deck for the first time, TRAKTOR starts to analyze the track to deter-
mine its tempo, and then calculate the Beatgrid and Waveform. The moment of the analysis can
be switched to another context in the Preferences.

Rather than selecting Favorite folders using 

SHIFT

, you can also scroll along the Browser Tree.

For this you need to switch the Browse behavior for the 

SHIFT

 button on the 

TRAKTOR S2 MK3

page in the Preferences.

7.2. Controlling Track Playback

The  Transport  Controls  and  the  Jog  wheels  on  the  S2  let  you  control  the  playback  behavior  of
tracks. This section describes the several interactions you can perform to control the playing track,
as well as previewing tracks for the next transition in the CUE channel.

Tutorials

26

Summary of Contents for TRAKTOR KONTROL S2


















































Reviews: