[5] Modulator / Macro Control Switch: The lower area of the B view can be switched to show the
MODULATORS
field containing the modulation sources or the
MACRO CONTROLS
field con
taining elements for assigning destinations and adjusting individual control amounts for the
four Macro Controls.
For additional sound variation SKANNER features Preset Morphing which allows you to
morph between two presets. For further information on Preset Morphing please refer to
↑
5.2.4, Preset Morpher Section
.
5.8.2
Source Section
SOURCE
is a Macro Control with up to three destinations in the sample reader engine. Typical
ly this is used for more "drastic" sound changes.
Source Parameters
View B — Source parameters
[1]
SOURCE
: The Macro Control knob which is the source of modulation for the target parame
ters.
[2] Modulation Target Menus: Macro Selector: The
SOURCE
macro controller has three targets
that can be chosen by drop-down menus each with its own control level. It is suggested to as
sign it to a MIDI controller like an expression pedal or as a sequencer automation parameter.
By pressing the button on the left the fader can be replaced by the signal of the monophonic
LFO.
[3] Amount Sliders: Control amount of the Macro Control on the first, second and third target.
Overview of SKANNER Ensemble
Macro Controls Section
SKANNER - Manual - 49
Summary of Contents for Skanner
Page 1: ...Manual...
