GUITAR RIG MOBILE – 32
5.4.1 Connecting the Input and Adjusting the Input Level
1.
Turn down the volume on your monitoring system to prevent hearing damages.
2.
Plug the cable connected to your guitar or bass into the input jack socket of the interface.
3.
Mind that, for an instrument that generates a stereo signal, you might need a split (insert
cable / y-cable, not included) to route both channels to the stereo input jack.
In order to achieve the best sound quality by providing the interface with a sufficiently power-
ful signal, you need to carefully adjust the input level of the GUITAR RIG MOBILE I/O.
The Input Level LED helps you to identify the level of the incoming signal:
LED Status
Meaning
LED is off
No incoming signal
LED flashing green
Incoming signal
LED flashing red
Incoming signal is too loud
Summary of Contents for Guitar Rig Mobile
Page 1: ...HARDWARE REFERENCE...
