GUITAR RIG MOBILE – 10
3 Parts of the GUITAR RIG MOBILE I/O Audio
Interface
1
The input socket (¼” jack, TRS stereo) will accept instrument level signals. It allows you
to connect a variety of different sound sources, including your electric guitar or bass. For
stereo input, a split (insert cable / y-cable, not included) is needed.
2
The input level control allows adjusting the amplification of the incoming audio signal.
3
The input activity LED indicates the level of the audio signal at the input. A green light
shows that a signal is present, while a red light indicates clipping, meaning that the input
level is set too high.
4
The output socket (¼” jack, TRS stereo) transmits the output signal received from your
computer application, such as GUITAR RIG 4 or your sequencer. Depending on your
amplification system, a split (insert cable / y-cable, not included) might be needed for
stereo transmission.
Summary of Contents for Guitar Rig Mobile
Page 1: ...HARDWARE REFERENCE...
