manualshive.com logo in svg

Native Instruments Guitar Rig Mobile, Hardware Reference Manual

Share
Download
Native Instruments Guitar Rig Mobile Hardware Reference Manual Download Page 28

GUITAR RIG MOBILE – 28

5.2  Hardware Installation

Use the supplied USB cable to connect the GUITAR RIG MOBILE I/O directly to a USB 2.0 
port on your computer.

GUITAR RIG MOBILE I/O is powered via USB. Operation is guaranteed only with USB 2.0 
controller as a single device or with self-powered USB 2.0 hubs.
After successfully installing the driver, the GUITAR RIG MOBILE I/O should be recognized au-
tomatically. If at any time the computer does not seem to recognize the GUITAR RIG MOBILE 
I/O, disconnect the USB cable, wait a few seconds, then re-connect it. If this does not solve 
the problem, restart your computer with the interface connected.

5.3  Configuration

This chapter explains how to use the GUITAR RIG MOBILE I/O audio interface under Mac 
OS X and particularly with the included GUITAR RIG 4. It is assumed that you have already 
activated GUITAR RIG 4 using the Service Center – please refer to the Setup Guide for help 
on this process.

Summary of Contents for Guitar Rig Mobile














































Reviews:

No comments

Brands by name

Popular brands

Load more brands