15.8. Saturation
The
Saturation
module emulates the behavior of analog circuits when signal levels go into
overdrive and clipping. This reduces signal peaks and add the same time adds harmonic content
to the signal, creating the warm and full sound associated with analog saturation. When taken to
the extreme, the module can be used to create distortion effects.
This module contains the following parameters and controls:
•
Module On/Off
: Activates or deactivates the module.
•
Preset menu (arrow button)
: Opens the Preset menu that enables you to load factory presets
or save and recall your own user presets.
•
Mode Selector
: Selects one of three available saturation modes,
Classic
,
Drums
, and
Tape
.
•
Gain
: Adjusts the input level of the module, effectively controlling the amount of saturation
applied to the signal.
•
Warmth
: Adjusts the level of low-frequency content in the signal. This control is only available
in
Tape
mode.
•
HF
: Adjusts the cutoff frequency of a low-pass filter applied to the signal. Frequency content
exceeding the cutoff frequency is attenuated. This control is only available in
Tape
mode.
•
Output
: Adjusts the output level of the module.
15.9. Limiter
The
Limiter
module is a specialized compressor with a high compression ratio and a fast
response. It effectively prevents the signal to rise above the specified level. You can use it to
protect your outputs and speakers from clipping or increase the overall loudness, however it can
also be applied creatively to shape the contour of a sound.
This module contains the following parameters and controls:
MASTER PAGE
66
