13. Setup Page
The
Setup
page provides tools specifically designed for drum playing and programming. You can
use them to fine-tune cells/Kits or create totally new sounds out of the existing library content. All
effects/parameters are cell-based, which means that each cell can have totally different settings.
•
To open the Setup page, click on the
Setup
tab at the bottom of the application.
The Setup page in the Edit area.
13.1. MIDI Input
The
MIDI Input
module lets you customize the MIDI channel and velocity response of cells and
change their trigger behavior.
The
MIDI Input
module contains the following settings and options:
The MIDI Input module.
•
Curve
: Adjusts the velocity curve for a cell using handles.
•
MIDI channel
: Specifies whether a cell should receive data from all MIDI channels or only a
specific MIDI channel with this menu.
•
Key Track
: Sets key range tracking. When activated (lit) and the key range exceeds one note
(refer to "Key Range control" in
), all samples in the current cell will change
pitch in response to the MIDI input. For example, if the key range is C1-D1 and you play D1 with
Key Track
on, the pitch will be two semitones higher than if you had played C1. When
deactivated, the cell's pitch will be determined solely by its root key and the
Tune
knob (refer to
).
•
Note Latch
: Activates "latch" for incoming notes. For instance, you can play a note to trigger
the sample, play the note again to stop it.
SETUP PAGE
45
