National PANTHER 5110, Instruction Manual

Page: 26 / 83

Page 22
5110 JOB SITE MOVEMENT
TO MOVE MACHINE WITHOUT POWER (PUSHING MACHINE)
Forward: To move the machine forward, levers need to be pushed forward. To lock levers in place,
connect a bungee-strap from each lever (pushing levers forward), pulling straps down to and connecting
to the front plate (See Figure A).
Backward: To move machine backward, levers need to be pulled backwards. To lock levers in place,
connect a bungee-strap from each lever (pushing levers backward), Pulling straps to the back of the
machine and connecting behind the seat or the rear of the machine (See Figure B).
ADJUSTING FLIP ARM CORD GUIDE IN CONFINED AREAS
In a hallway or confined area, center the flip arm cord guide to the twelve o’clock position so it is standing
straight up (See Figure C). Secure with securing pin
FORWARD
Figure A
BACKWARD
Figure B
Figure C
WARNING: Always remove straps before starting motors. Failure to do so will make machine move
and may cause property damage and/or bodily injury.