National All Day Battery Ride-On 7700 Instruction Manual Download Page 41 | Manualshive

Page: 41 / 89

background image

Page 41

7700 BLADES

TYPES OF BLADES

PREMIUM HIGH TEMPERED BLADES (.062)

Works on all glued down carpets, VCT, VAT, rubber tile, cork, re-scraping adhesive, elastomeric
coatings. Great for floor accumulations. Ultra high quality spring steel is extra hard for long blade life
between sharpening.

HEAVY DUTY BLADES (.094)

Works on VCT, VAT, wood, tile, rubber epoxy, thin-set, elastomeric coatings, scraping, thin set and glued
ceramic. A heavy-duty blade that still gives a little flex. Blade sharpening process helps these blades to
stay sharper longer.

EXTRA HEAVY DUTY BLADES (.187 & .250)

Works on VCT, VAT, wood, tile, thin ceramic, re-scraping thin set, all carpets, cork, elastomeric coatings
re-scraping rubber and urethane coatings. Extremely hard, high abrasion alloy for though tear-up
situations. Holds the edge extremely well.

SHOE BLADES/ANGLE SHANK BLADES (.500)

Works well for ceramic, wood, thick epoxy, thin-set, mud set, decorative concrete topping and much
more. Blade is mounted at an angle to achieve the optimum shear point for optimum performance. Made
from an ultra tough alloy, which is put through special processing to achieve an unbelievable edge
holding ability.

SHOE BLADES/ANGLE SHANK BLADES WITH CARBIDE TIPS (.500)

Works well for ceramic, wood, thick epoxy and elastomeric coatings. Carbide tipped for holding a sharp
edge for long periods. Nothing else performs like carbide when no other blade will work. Blade is
mounted at an angle to achieve the optimum shear point for optimum performance. Made from an ultra
tough alloy, which is put through special processing to achieve an unbelievable edge holding ability.

SELF-SCORING BLADES (.062 & .094)

Works on attached cushion, Unitary or secondary backing, vinyl back, soft to medium PVC, linoleum,
carpet tiles, soft cork, Enhancer and Unibond hot melts. Instead of pre-scoring a job, the self-scoring
blades have "wings" that automatically do the scoring. Blade hardening process makes these blades
tough and long lasting.

RAZOR/SCRAPER BLADES (.032 & .045)

Used for re-scraping thin epoxies, thin mil coatings like; urethane paint, poured elastomeric coatings up
to 60 mil, hard to remove adhesive and much more.

TILE BOX

Assists for a fast cleanup and collection of tile debris for quick removal. Can be used to remove easy to
remove tile. Extremely high abrasion alloy for a long lasting edge. Edge can be re-sharpened.

«
...
39
40
41
42
43
...
»

Summary of Contents for All Day Battery Ride-On 7700


























































































Reviews:

No comments

Related manuals for All Day Battery Ride-On 7700

Brand: IBM Pages: 7

Brand: IAI Pages: 3

PortaMate PM3300

Brand: HTC Pages: 2

PRO 8425 0206 30

Brand: Atlas Copco Pages: 64

Brand: Zenit Pages: 8

Brand: phytron Pages: 29

Brand: Wido Pages: 16

Brand: 9circle Pages: 14

Brand: G-Tec Pages: 11

CP7600xB Series

Brand: CP Pages: 64

Brand: FINE INSTRUMENTS CORPORATION Pages: 17

Brand: Airpress Pages: 16

Brand: Astro Tool Pages: 4

Brand: IAN CANADA Pages: 15

Brand: Ferm Pages: 16

Brand: Manson Engineering Industrial Pages: 2

Brand: Parkside Pages: 172

Brand: tacwise Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands