Chapter 5 • Commissioning
21
Chapter 5
Commissioning
5.1
Powering Up
After all connections have been made, check the polarity of all wires
and connections to verify they are secured in the terminals and the
terminal screws are tight and connected to the proper terminals. If the
polarity of the wires is not correct, or they are connected to the wrong
terminals, you will not get weather data and may damage the sensors
or the communications module. After proper terminations have been
verified, it is ready to power on.
Turn on the power.
Verify the power LED is illuminated on the communication module.
Wait 15 minutes for the data to upload to the website and login to
MYPVDATA.com. Verify that the sensor readings on the MYPVDATA
site are available and accurate.
Summary of Contents for SolarMagic
