National Security Systems D636, User Manual

Page: 7 / 27

NOT READY TO ARM
(custom text)
SYSTEM COMMAND
PERIMETR PARTIAL
EXIT NOW
PERIMETR PARTIAL
(custom text)
Partially Arm the Perimeter
I have this feature.
I do not have this feature.
COMMAND 8 is used to arm the perimeter of your building while selected
portions of the perimeter remain disarmed. Perimeter zones that are not
secure (faulted) when COMMAND 8 is entered, are automatically bypassed
and are not included in the system. COMMAND 8 does not arm the interior
of your building. Exit delays are provided with this arming command.
Although this command does not send a "Closing Report" to the Central
Station, it will still send an alarm if a perimeter zone is faulted.
NOTE:
Zones that have been bypassed (not armed with the system)
cannot be armed again until the system has been disarmed, the zones
returned to normal, and the system is armed again. To cancel COMMAND
8, enter your personal passcode and press
ENT
.
Application
Use this arming command in residential systems to arm the front of your
house while the interior and the rear perimeter doors are left unarmed,
giving you freedom of movement between the house and patio.
In commercial systems, when you need access to the large overhead doors
to receive deliveries, using COMMAND 8 will allow you to keep the rest
of your building armed.
COMMAND 8
Using COMMAND 8: Display:
1. Before arming with COMMAND 8,
decide which zones are to be left
disarmed. Fault the zones by leaving
a door or window open. The zone(s)
must remain open until after the
exit delay time expires.
2. Press the
COMMAND
bar.
3. Press the
8
key.
The
ARMED
indicator light begins to flash on and off. This indicates
that the system has begun exit delay time.
4. The indicator will remain lit when the
exit delay time has expired and the
system becomes armed.
NOTE:
When performing a COMMAND 8, and no zones are
faulted, or the zones return to normal before the exit delay
time expires, the system is armed as in COMMAND 3.
5. To disarm your security system, enter your personal passcode and
press
ENT
before the delay time expires.