SYSTEM COMMAND
REMOTE PROG
REQUEST
READY TO ARM
(custom text)
Enable Remote Account
Management
I have this feature.
I do not have this feature.
Your security system has the ability to be managed remotely from the
Central Station without having a serviceperson on the protected premises.
By using COMMAND 43 you can enable remote account management
from the Central Station. Remote account management conducted from the
Central Station is done with the aid of a specially equipped computer.
Typical remote account management changes may include: personal
passcode(s), entry/exit delay times, add or delete system arming
commands, etc. Before using COMMAND 43 follow the instructions
below.
Using COMMAND 43:
Display:
1. Ensure that your security system is
disarmed.
2. Call the Central Station using this phone number __________________.
This number is designated for the Remote Account Manager. You
must make the call using the telephone located
______________________________________________________.
COMMAND
4
3
3. Identify yourself and your premises (account number, name, address,
etc.) and advise the operator of the services you wish to have
performed.
4. When the operator directs you, enter COMMAND 43 at your
Command Center keypad:
5. Press the
COMMAND
bar.
6. Press the
4
key
7. Press the
3
key.
The telephone line that the call was made from is not active when
remote account management is in progress. You may hang up the
telephone.
8. When remote account management is
completed, your telephone line is
restored to normal service.
READY TO ARM
(custom text)
