National ramp Liberty Series, Installation Manual

Page: 70 / 138

18.7.12.5.
Cut the handrails using the pipe cutter and connect the elbows after clearing any
burrs.
Step 4  Mount end loops
18.7.13.
Insert the metal rail connector into the top and bottom of each handrail end, with the set
screw facing the ground.
18.7.14.
Fit the end loops onto the other end of the metal rail connectors.
18.7.15.
Make sure the connector and handrail are aligned to prevent sharp edges before tightening
with an Allen key.
D
A A
D D
N N
R R
DRAWN
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
*NOTE: Always install connector with set
screw facing ground
Tighten Connector,
Set Screw with an
Allen key
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
Metal Rail Connector
[ 70 ] NATIONAL RAMP
™
| FREEDOM NOW
www.nationalramp.com | 877-884-RAMP(7267)
image 39
image 40
Trim filler pipe here