Remote Monitor - (Optional accessory)
9
Connecting the Remote Monitor
The Remote Monitor can be plugged into the Power
Pack DC25 and provides status about the system
on a high-contrast LCD screen.
Information such as Main and Auxiliary battery voltages,
charge mode, charge current, battery type, battery
temperature and error conditions are displayed in a
choice of 3 user-selectable display modes.
In addition to the selectable screen modes, the user is
able to increase or decrease the screen brightness and
choose to turn the display on or off.
The screen will turn off automatically when the system
is idle. It will turn on automatically when the next charge
cycle starts.
Lift the dirt cover on the Remote Monitor port.
Connect the square end of the supplied data cable to
the Power Pack remote port as indicated
(fig 1)
.
Connect the flat end of the data cable to the Remote
Monitor.
(fig 2).
This connector can fit both ways.
It can fit in one direction only.
Press the plug until it clicks securely.
Locate the Remote Monitor in a convenient location
using the supplied mounting fixture.
Fig 2
Power
Screen mode
Brightness UP
Brightness DOWN
Fig 1
REMOTE MONIT
OR
