Dedicated Charger Port
Connecting External Chargers
SOLAR CHARGE - In order to supply the Power Pack
with Solar power, an external solar regulator is required.
Connect the output from the regulator to the secondary
input.
If the charge source has a current greater than 15A,
connect it directly to the battery terminals.
The Portable Power Pack has a secondary charge input
that is designed for use with larger AC battery chargers
and solar regulators up to 15A.
In order to connect other brands of chargers to this input,
a quick-connector cable is available separately.
Make sure the main breaker switch is in the ON position
during charge.
The Portable Power Pack has a charge port specifically
for use with National Luna Intelligent Battery Chargers.
Insert the charger quick-connector into the charge port
labeled "NL5 CHARGER" until it clicks securely.
This port can support up to 10A charge current.
NL5 CHARGER
When using chargers or inverters connected to the
OUTPUT plugs, the main switch must be ON.
High-current loads such as AC Inverters can be
connected to the OUTPUT plugs for powers up to 600W.
Larger-power loads exceeding 600W (50A) should be
connected directly to the battery terminals instead.
Connecting inverters and high-power loads.
50A
15A
50A
50A
8
