CONNECT Mobile APP
The Portable Power Pack can communicate with a mobile device using the
This application is available for iOS and Android systems and can be downloaded
NL CONNECT application.
from the respective APP stores.
If a device has been connected previously, it will be saved in the devices list.
The Power Pack will be listed as "NL Pack" with a 3-digit number. This number
corresponds to the last 3 digits of the Power Pack serial number.
To forget a device, tap the trash bin icon next to the listed device.
If a custom name has been set for a device, the custom name will be shown
instead.
Once installed, open NL CONNECT. It will start to scan for nearby compatible
devices. Only compatible devices that are in range are listed.
Tap the desired device to connect to it.
The first time a device is connected, a prompt to enter the PIN will be displayed.
Use the Power Pack serial number as the PIN (listed on the side of the Pack).
After a successful connection, this device and its PIN will be saved into the
device list.
There are 3 different dashboards that can be chosen depending on your preferences. The preferred display
can be chosen at any time by swiping left or right.
The dashboard is split into 3 sections :
The middle section shows the Alarm and Timer settings as well as additional system data.
The top section shows the battery and system status at a glance either on a single gauge, dual-bar or dual
gauge display.
The bottom section shows a status block. This will shows the system current mode and any errors.
This block is also used when making changes to the alarm or timer values.
APP Dashboards
10
Enter PIN
Where to find PIN ?
ENTER
NL Pack 621
80:1F:1A:30:11:EC
Select device
SCAN
