National Instruments VXIpc 770 Series User Manual Download

Page: 106 / 109

Index

I-2

ni.com

Ethernet connector and signals, 5-5
GPIB connector and signals, 5-12
parallel port connector and signals, 5-6
peripheral expansion overview

(table), 5-1

PS/2 connector and signals, 5-9
SCSI connector and signals, 5-13
SMB TRGIN/OUT and EXTCLK, 5-11
Universal Serial Bus (USB) connector

and signals, 5-8

VGA connector and signals, 5-2

data storage, 5-16
debugging, 4-9
developing your application, 4-1
device interaction

application development

device interaction, 4-3

diagnostic tools (NI resources), C-1
DMI Event Logging menu, 3-10
documentation

conventions used in the manual,

how to use this documentation set,

NI resources, C-1
related documentation,

drivers

installation

GPIB (IEEE 488.2), 6-2
video, 6-2

NI resources, C-1
obtaining latest drivers, 6-3

EEPROM, 3-6

configuration, 3-7
fixing an invalid configuration, 3-7

electrostatic discharge, 2-1
Ethernet connector

location and pinout (figure), 5-5
signals (table), 5-6

examples (NI resources), C-1
Exiting BIOS Setup menu, 3-14
EXTCLK, 5-11

FAILED LED, 5-15
floppy drive, using external floppy drive, 6-6
front panel

connectors, 5-1
features, 5-15

front panel SMB ExtClk setup, 3-21

GPIB (IEEE 488.2), 5-12

connector location and pinout

(figure), 5-12, 5 -14

connector signals (table), 5-13
driver installation, 6-2

hard drive, 5-16

jumper, 3-4
restoring image, 6-4

hardware defaults, 3-1
help, technical support, C-1

IDE controller, using SCSI hard drive in

addition, 6-1

IDE LED, 5-15
IEEE 488.2, 5-12
images directory, 6-2

Summary of Contents for VXIpc 770 Series














































































































Search results

Summary of Contents for VXIpc 770 Series

Reviews:

Related manuals for VXIpc 770 Series

Brands by name

Popular brands

National Instruments VXIpc 770 Series, User Manual

Search results

Summary of Contents for VXIpc 770 Series

Reviews:

Related manuals for VXIpc 770 Series

Brands by name

Popular brands