Chapter 3
NI-VXI Software Installation and Configuration
© National Instruments Corporation
3-7
VXI-AT2000/NI-VXI MS-DOS Getting Started
Running VXIEDIT
VXIEDIT.EXE
is the VXI resource editor program. You can use this program to configure the
system, edit the manufacturer name and ID numbers, and edit the model names of VXI and non-
VXI devices in the system, as well as the system interrupt configuration information. This
program also displays the system configuration information generated by the Resource Manager.
To run
VXIEDIT
from any directory, make sure that the
PATH
environment variable has the
destination directory of the NI-VXI software added to it. This program uses the different
configuration files (
*.CFG
), table files (
*.TBL
), and help files (
*.HLP
) in its execution. Be
sure that the environment variable
NIVXIPATH
is set to the destination directory of the NI-VXI
software for proper execution. The default destination directory pathname used by the program
is
C:\NIVXI
.
Figure 3-1 shows the functions available under
VXIEDIT
.
Figure 3-1. VXIEDIT Main Menu
When you select the Configuration Editor from the main menu, the Logical Address
Configuration Editor menu (shown in Figure 3-2) is displayed. The following sections describe
the various configuration options available under the Logical Address, Bus, and Device
Configuration menus.
Select Next and Previous to move among the three configuration editors. You can change the
default settings to any value within the range shown to the right of each item by using the left
and right arrow keys.
