Introduction
Chapter 1
VXI-AT2000/NI-VXI MS-DOS Getting Started
1-2
© National Instruments Corporation
What Your Kit Should Contain
Your kit should contain the following components:
Component
Part Number
AT-MXI Interface Board
180775-01
Standard VXI-MXI Interface Module
181045-01
or
Enhanced VXI-MXI Interface Module with INTX option
181045-02
3.5 in. NI-VXI Distribution Disks for the AT-MXI and
422178-48
and
MS-DOS
422179-48
and
5.25 in. NI-VXI Distribution Disks for the AT-MXI and
420178-48
and
MS-DOS
420179-48
2 m Type M1 MXIbus Cable *
180758-02
Getting Started with Your VXI-AT2000 and the NI-VXI
Software for MS-DOS
320219-01
NI-VXI DOS Utilities Reference Manual
320323-01
NI-VXI Software Reference Manual for BASIC
320328-01
NI-VXI Software Reference Manual for C
320307-01
* The 2 m Type M1 MXIbus cable is included in your kit unless you specified
otherwise in your order. You may have ordered your kit without this cable so
that you could order a different type or length of MXIbus cable. Refer to the
Optional Equipment section on the following page.
Make sure each of these items is in your kit. If any item is missing, contact National
Instruments.