![background image](http://html1.mh-extra.com/html/national-instruments/vxi-1000/vxi-1000_installation-manual_3475833004.webp)
© National Instruments Corporation
1
VXI-1000 Rackmount Adapter Kit Installation Guide
Introduction
The rackmount adapter kit is an option for the VXI-1000 mainframe. This manual discusses how
to assemble and install the kit and mount the mainframe. Illustrations are included to guide you
through the installation steps.
The kit adapts the VXI-1000 for mounting in a standard 19-inch wide rack. The depth between
the front and rear vertical rails can be no less than 22 inches and no more than 28 inches. The
VXI-1000 can be mounted flush with the front of the rack, or recessed up to three inches.
Warning:
The equipment rack must either be bolted to the floor or include extension feet. An
unsecured rack is unsafe if the mainframe rackmounting assembly is extended on its
tracks.
Mounting Requirements
The rackmounted equipment configuration must meet the following requirements for rackmount
installation:
•
A clear mounting space at least 7 inches high and 23 inches deep in a standard 19-inch
equipment rack.
•
At least 2 inches clearance between the sides of mainframe and the sides of the rack for air
circulation.
Note:
You may need to remove the VXI-1000's top and bottom covers to prevent interference
with equipment mounted directly above or below the VXI-1000.
What Your Kit Should Contain
Your rackmount adapter kit should contain the following components:
Components
Adjustable Mounting Bracket Assemblies (2)
Chassis Track Sections (2)
Stationary Track Sections (2)
Intermediate Track Sections (2)
Rear Mounting Brackets (2)
8-32 Pan Head Screws (12)
(continues)