![background image](http://html1.mh-extra.com/html/national-instruments/vision-cvs-1455/vision-cvs-1455_user-manual_3429982034.webp)
Chapter 3
Digital I/O Functionality
NI CVS-1450 Series User Manual
3-2
ni.com
TTL Inputs and Outputs
TTL is a fast-switching, 5 V, digital, signaling standard commonly used
for applications that require high precision, such as camera triggering.
TTL inputs and outputs do not require a separate power supply.
Caution
Do
not
connect voltage or current sources to TTL outputs. Doing so could
damage the NI CVS-1450 device.
Table 3-1 summarizes the TTL inputs and outputs available on the
NI CVS-1450 device.
Isolated Inputs and Outputs
The isolated inputs and outputs on the NI CVS-1450 device have a separate
ground reference from the main NI CVS-1450 device supply, providing an
easy means to prevent ground loops that can introduce noise into a system.
You can apply signals up to 30 V to the isolated inputs. The voltage swing
of the isolated outputs is determined by the V
iso
you supply on the
connector.
Note
The isolated outputs have current-limiting protection circuitry. If this circuitry is
tripped, you can re-enable the outputs by restarting the NI CVS-1450 device or by toggling
the output state in the software.
Table 3-1.
TTL Inputs and Outputs
Primary
Function
Input or
Output
Number
Available
Signal
Names
44-Pin DSUB
on NI CVS-1450
Device
Pin Number
37-Pin
Terminal
Block
Pin Number
Trigger
Input
2
TTL Input 0
TTL Input 1
1
16
1
2
Timed Pulse
Output
6
TRIG 1, Pulse 5
TRIG 2, Pulse 6
TTL Output 1, Pulse 1
TTL Output 2, Pulse 2
TTL Output 3, Pulse 3
TTL Output 4, Pulse 4
—
—
4
6
7
18
—
—
5
7
8
20
Watchdog
Output
1
TTL Output 0
3
4
General-Purpose
Output
3
TTL Output 5
TTL Output 6
TTL Output 7
19
21
22
21
23
24
Summary of Contents for Vision CVS-1455
Page 1: ...CVS 1455...