Chapter 9
VirtualBench-Arb and VirtualBench-Waveform Editor
© National Instruments Corporation
9-3
Getting Started with VirtualBench
Figure 9-2. Channels Tab of VirtualBench-Arb Settings Dialog Box
c.
Select the device you want to use for waveform generation.
The Instrument list displays only devices you have configured
successfully in the Measurement & Automation Explorer. Refer to
Chapter 4, Configuring Your System, in the IVI Driver Library
User Manual for more information about configuring your IVI
virtual instrument.
d.
Select the corresponding DAQ device channels to map to the
VirtualBench-Arb alphabetical channel names.
e.
Click OK.
2.
In the front panel of the Waveform Generator, click the Load
Waveform button to invoke the File name: dialog box. Select a
waveform file.
3.
Click the Play button (the button with a green triangle) to begin
waveform generation.
4.
Click the Stop button (the button with a red square) to end signal
generation.
Note
Refer to the VirtualBench-Arb Online Reference for more information about
configuring VirtualBench-Arb for your specific application.