background image

GETTING STARTED GUIDE

USRP-2930/2932

USRP Software Defined Radio Device

This document explains how to install, configure, and test the following USRP devices:

USRP-2930 Software Defined Radio Device

USRP-2932 Software Defined Radio Device

The USRP-2930/2932 can send and receive signals for use in various communications
applications. This device ships with the NI-USRP instrument driver, which you can use to
program the device.

Contents

Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2

Verifying the Kit Contents................................................................................................ 3

Environmental Guidelines.........................................................................................................4

Environmental Characteristics.......................................................................................... 4

Installing the Software.............................................................................................................. 4

Installing the Software Using NI Package Manager.........................................................4
Installing the Software Using the Driver Download Page................................................5

Installing the Device................................................................................................................. 5

Synchronizing Multiple Devices (Optional)..................................................................... 6

Configuring the Device.............................................................................................................6

Setting Up the Network (Ethernet Only).......................................................................... 6

Programming the Device.......................................................................................................... 9

NI-USRP Instrument Driver............................................................................................. 9
NI-USRP Examples and Lessons....................................................................................10
Verifying the Device Connection (Optional).................................................................. 11

Troubleshooting...................................................................................................................... 12

Device Troubleshooting.................................................................................................. 12
Network Troubleshooting............................................................................................... 14

Front Panels, Back Panels, and Connectors............................................................................15

Direct Connections to the Device................................................................................... 15
USRP-2930 Front Panel, Back Panel, and LEDs............................................................16
USRP-2932 Front Panel, Back Panel, and LEDs............................................................18

Where to Go Next................................................................................................................... 20
Worldwide Support and Services............................................................................................ 20

Summary of Contents for USRP-2930






















Reviews: