background image

Additional SMA (m)-to-SMA (m) cables to connect both channels with external devices
or to use the REF IN and PPS IN signals

GPS antenna for devices with GPS disciplined oscillator (GPSDO) support

Environmental Guidelines

Notice

 

This model is intended for use in indoor applications only.

Environmental Characteristics

Temperature and Humidity

Operating Temperature

0 °C to 45 °C

Operating Humidity

10% to 90% relative humidity, noncondensing

Pollution Degree

2

Maximum altitude

2,000 m (800 mbar) (at 25 °C ambient temperature)

Shock and Vibration

Operating shock

30 g peak, half-sine, 11 ms pulse

Random Vibration

Operating

5 Hz to 500 Hz, 0.3 g

rms

Nonoperating

5 Hz to 500 Hz, 2.4 g

rms

Installing the Software

You must be an Administrator to install NI software on your computer.
1.

Install an application development environment (ADE), such as LabVIEW or LabVIEW
Communications System Design Suite.

2.

Follow the instructions below that correspond with the ADE that you installed.

Installing the Software Using NI Package Manager

Ensure that you have installed the latest version of NI Package Manager. To access the
download page for NI Package Manager, go to 

ni.com/info

 and enter info code

NIPMDownload

.

Note

 

NI-USRP versions 18.1 to current are available to download using NI

Package Manager. To download another version of NI-USRP, refer to 

Installing the

Software Using the Driver Download Page

.

1.

To install the latest NI-USRP instrument driver, open NI Package Manager.

2.

On the 

BROWSE PRODUCTS

 tab, click 

Drivers

 to display all available drivers.

4

  | 

ni.com

  | 

USRP-2930/2932 Getting Started Guide

Summary of Contents for USRP-2930






















Reviews: