NI USB-621x OEM User Guide
8
ni.com
Device Components
Table 1 contains information about the components used for interfacing
and interacting with the USB-621
x
OEM device.
Modifying the USB Device Name in Microsoft Windows
You can change how the USB-621
x
OEM device name appears when users
install the device in both the Found New Hardware Wizard that appears
when the device is initially installed and in the Windows Device Manager.
Windows Vista/XP Users
Figure 9 depicts how a USB-6211 (OEM) device name appears in the
Found New Hardware Wizard and Windows Device Manager.
Table 1.
USB-621
x
OEM Components
Component
Reference
Designator(s)
on PCB
Manufacturer
Manufacturer
Part Number
50-pin connector
J6
*
, J7
3M
N2550-6002UB
USB connector
J5
AMP
787780-1
50-pin board mount socket
†
—
3M
8550-4500PL (or equivalent)
Mounting standoff,
using board mount socket
—
RAF Electronic
Hardware
M1261-3005-SS
‡
with M3
×
0.5 screw
Mounting standoff,
using ribbon cable
—
RAF Electronic
Hardware
2053-440-SS
**
with 4-40 screw
*
J6 is available on USB-6212/6216/6218 OEM devices only.
†
You can use either one or both 50-pin connectors to board mount the USB-6212/6216/6218 OEM device.
‡
3/16 in. HEX female-to-female, 14 mm long.
**
3/16 in. HEX female-to-female, 1/4 in. long.
