Chapter 2
System Setup
TPC-2206/TPC-2212/TPC-2215 User Manual
2-4
ni.com
Panel Mounting
Follow these steps to mount the TPC-22
xx
in a panel:
1.
Be sure the adhesive waterproof gasket on the front bezel is in position.
2.
Install the TPC-22
xx
in the panel opening. (Refer to Appendix A,
Specifications
, for cutout dimensions.)
3.
Hook the clamps included in the accessory pack to the holes around the
four sides of the bezel. Be sure to remove the protective inserts in the
panel mounting holes.
4.
Insert the screws included in the accessory pack into the clamps. To
fasten the TPC-22
xx
to the panel, tighten the screws so they push
against the mounting panel.
Note
The mounting panel thickness should be less than 6 mm (0.236 in.).